Escort Radar Forum  

Go Back   Escort Radar Forum > Detector Accessories > Mounts

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 4 Weeks Ago
wjhachet wjhachet is offline
Junior Member
 
Join Date: Mar 2012
Posts: 2
Default EZ Max Mount - Falling Off

Have a Max 360c and recently purchased the M1 and now the EZ Mag Mount keeps falling off the windshield. Cleaned the mount with alcohol and cleaned the windshield and still have the same issue...
Reply With Quote
  #2  
Old 4 Weeks Ago
EscortRadar's Avatar
EscortRadar EscortRadar is offline
Official Escort Rep
 
Join Date: Apr 2009
Posts: 16,379
Default

Do not use alcohol to clean StickyCup. Hopefully yours has survived.

If it is not longer sticky then it has accumulated debris. To clean it, rinse the cup with water while rubbing the cup with your finger. You should feel the debris coming off. Shake it and allow it to air dry for a few minutes. Do not use a towel or you will re-apply debris to the cup. Afterwards it should be as sticky as when you bought it!

When mounting your StickyCup to the windshield, make sure to first open the locking lever. Apply it to the windshield, then close the lever.

When removing StickyCup from your windshield, open the locking lever and pull the tab on top of the cup.
__________________

Escort Radar customer service is available from 9am-5:30pm Eastern Time Mon-Fri at 1-800-543-1608 or by live chat
Reply With Quote
  #3  
Old 4 Weeks Ago
wjhachet wjhachet is offline
Junior Member
 
Join Date: Mar 2012
Posts: 2
Default

Well Escort CS told me to use alcohol so maybe they need some coaching. I will try what you recommended and see if that works
Reply With Quote
  #4  
Old 3 Weeks Ago
kasher1979's Avatar
kasher1979 kasher1979 is offline
Senior Member
 
Join Date: Apr 2013
Location: USA
Posts: 979
Default

Quote:
Originally Posted by wjhachet View Post
Well Escort CS told me to use alcohol so maybe they need some coaching. I will try what you recommended and see if that works
Yea if they told you this they were confused. You can use water. I have simply stuck mine under the faucet and let the water run over the sticky part while using my thumb to light rub it clean. let it dry then it's good to go.

When you put it back on with the lever pulled down press the mount firmly and while applying decent amount of pressure close the lever. This will get a air tight seal and well as the sticky part doing it's job after being cleaned. You could use a little alcohol to wipe the glass off and let it dry before applying. This would strengthen your application. This also might be what the Customer Service Agent was trying to tell you regarding alcohol.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:15 AM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2018 Escort Inc.