![]() |
|
![]() |
|
Thread Tools | Search this Thread | Display Modes |
|
#1
|
||||
|
||||
![]()
We are pleased to announce the availability of a software update for the Passport 9500ci which adds the following features:
- In the Passport 9500ci's settings menu, turn "Ka SW" off then turn on the Ka segments that you would like the 9500ci to detect. - In Escort Live's "Radar Settings" menu, turn "Ka" off then turn on the Ka segments that you would like the 9500ci to detect. If you leave the "Ka" setting on then the segment settings will not take effect. - RDR is listed in the "bands" settings, after TSR. Disabling RDR will enhance radar detection performance but with increased Ka false alerting. Disabling un-needed Ka segments will help reduce Ka false alerting. Once you set these options then they will remain set in your 9500ci, even between power cyclings, until you change them or restore the unit's factory default settings. The Ka segment frequencies, in GHz, are: Ka1 = 33.392 - 33.704 Ka2 = 33.704 - 33.896 Ka3 = 33.886 - 34.198 Ka4 = 34.184 - 34.592 Ka5 = 34.592 - 34.808 Ka6 = 34.806 - 35.166 Ka7 = 35.143 - 35.383 Ka8 = 35.378 - 35.618 Ka9 = 35.595 - 35.835 Ka10 = 35.830 - 35.998 Only enabling segments Ka2, Ka5, and Ka8 should cover most users in North America. A modification to the system's high and low voltage protection was also implemented in this software. The system will shut off with input voltage below 10.5VDC and above 16VDC. Thank you for choosing Escort Radar!
__________________
![]() Escort Radar customer service is available from 9am-5:30pm Eastern Time Mon-Fri at 1-800-543-1608 or by live chat Last edited by EscortRadar; January 15th, 2015 at 04:37 PM. Reason: added voltage protection mention |
#2
|
||||
|
||||
![]() Quote:
__________________
2005 2500HD Duramax (EFI Live Via Punisher Perf.) Escort 9500CI w/ triple LSPs 2/5/6/8 on TSR/RDR OFF Escort Redline 2/5/6/8 on TSR/RDR OFF Escort Passport MAX2 Escort Redline (wife's car) LIVE DW Mobius Dashcam RX65 S7 (Sold) 8500 X50 s7 Rev. 5 (Sold) 2005 9500IX (passed along to my old man) 2011 ZR3 laser shifters 2005 (SOLD) QI45 (SOLD) 2010 Decatur Gen II 35.5 KA Kustom PL2 Bushnell Speedster III Laser Interceptor laser tester |
#3
|
|||
|
|||
![]()
well that just stinks, I have been stoked since i heard about this up date and now it means nothing to me since i have the older system
![]() Question? If i add the LSP up grade to my older 9500ci will that then allow me to do the update? |
#4
|
||||
|
||||
![]()
Adding LSPs will not currently allow you to use this software. Please read the entire post. The update for older 9500ci's which have a serial number beginning with 16 should be available in a few weeks, early 2015.
__________________
![]() Escort Radar customer service is available from 9am-5:30pm Eastern Time Mon-Fri at 1-800-543-1608 or by live chat |
#5
|
|||
|
|||
![]()
After updating segment 3 stays on. I can toggle all the other segments to on/off but segment 3 reverts to on each time I try to turn it off.
I've tried it after updating, and also after going to the Advanced tab and updating all. Same result when attempting to turn off segment 3. Is it normal to not be able to turn off segment 3? I thought RDR was also supposed to be able to be turned off now. I don't see this as an option, and I've explored every setting that I can find (using iPhone to configure detector, and I just checked that there is not a newer version of Escort Live! available). I don't see TSR or RDR in the band section as listed above... Last edited by Megavolt17; December 24th, 2014 at 02:15 PM. |
#6
|
||||
|
||||
![]() Quote:
__________________
2005 2500HD Duramax (EFI Live Via Punisher Perf.) Escort 9500CI w/ triple LSPs 2/5/6/8 on TSR/RDR OFF Escort Redline 2/5/6/8 on TSR/RDR OFF Escort Passport MAX2 Escort Redline (wife's car) LIVE DW Mobius Dashcam RX65 S7 (Sold) 8500 X50 s7 Rev. 5 (Sold) 2005 9500IX (passed along to my old man) 2011 ZR3 laser shifters 2005 (SOLD) QI45 (SOLD) 2010 Decatur Gen II 35.5 KA Kustom PL2 Bushnell Speedster III Laser Interceptor laser tester |
#7
|
|||
|
|||
![]()
How can we be sure which Ka segments are safe to disable? Is it possible to change the display to show the exact frequency of Ka alerts? If so, you can see the exact frequencies of the guns used in the area.
|
#8
|
||||
|
||||
![]()
Decatur and kustom center at 35.5 ghz, mph industries centers at 33.8 ghz and stalker centers at 34.7. Allow a little each way for frequency drift and you have your segments. Go into settings under meter options and select spec mode. That will display the actual frequency during any radar encounter
__________________
2005 2500HD Duramax (EFI Live Via Punisher Perf.) Escort 9500CI w/ triple LSPs 2/5/6/8 on TSR/RDR OFF Escort Redline 2/5/6/8 on TSR/RDR OFF Escort Passport MAX2 Escort Redline (wife's car) LIVE DW Mobius Dashcam RX65 S7 (Sold) 8500 X50 s7 Rev. 5 (Sold) 2005 9500IX (passed along to my old man) 2011 ZR3 laser shifters 2005 (SOLD) QI45 (SOLD) 2010 Decatur Gen II 35.5 KA Kustom PL2 Bushnell Speedster III Laser Interceptor laser tester |
#9
|
||||
|
||||
![]() Quote:
Best rule of thumb: leave 2/5/8 ON, TURN THE REST off. Turn RDR OFF.
__________________
Stir-O >Redline-O>RX65 S7>Redline EX =Max 360 |
#10
|
|||
|
|||
![]()
If only I COULD turn off segment #3!
|
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|