Escort Radar Forum

Escort Radar Forum (http://escortradarforum.com/forums/index.php)
-   Power Cords (http://escortradarforum.com/forums/forumdisplay.php?f=25)
-   -   Wiring guide for SmartCord Live Direct Wire (http://escortradarforum.com/forums/showthread.php?t=18891)

Traxtar928 October 7th, 2019 01:26 PM

Wiring guide for SmartCord Live Direct Wire
 
Wanted to do a continuity test to clear up any conflicting information out there, both with the RJ11 cable that goes from the directwire live module to the detector, and the RJ9 cable that goes from the directwire live module to the fuse panel.

The RJ11 is a straight-wire cable. Here are the ends side-by-side.

https://i.imgur.com/Js6TBEP.jpg?1

The RJ9 cable was the more difficult one to do with one hand and take photos. Looking at the back of the connector, opposite the tab, pin 3 is +12V, and pin 2 is ground.

https://upload.wikimedia.org/wikiped...et_diagram.svg

https://i.imgur.com/KDzG54D.jpg?1

https://i.imgur.com/gbU08S7.jpg?1


All times are GMT -4. The time now is 04:23 AM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2018 Escort Inc.